Pulsarlube V - Electrochemical lubricator (Nitrogen charge) with 6 different adjustment possibilities and LCD display - Capacity 125 cc - With heavy application grease (pack of 10 pieces)
Pulsarlube V - Electrochemical lubricator (Nitrogen charge) with 6 different adjustment possibilities and LCD display - Capacity 125 cc - With heavy application grease
The Pulsarlube V automatic lubricator works thanks to an electrochemical reaction that generates an inert gas (Nitrogen - N2) through the use of an electrolyte and electric energy.
It is designed to allow users to easily set the dispensing rate using a microprocessor and an LCD display.
The Pulsarlube V controls the electrolytic reaction for the best delivery rate and delivers a precise amount of grease at the set speed.
It is suitable for industrial applications.
This product is an intrinsically safe product, certified as Ex ia IIC T4 for use in hazardous areas.
|Type of gas||Nitrogen(N2) gas|
|Gas generation method||Electrochemical|
|Capacity of the greaser||125 ml|
|Maximum operating pressure||5kgf/cm² (70psi)|
|Operating temperature range||-20°C ~ 55°C ( -4°F~131°F)|
|Settlement periods of||1, 3, 6, 9 e 12 months|
|Grease size|| |
60ml : Ø77mm(3.03") x 92mm (3.62")
120ml : Ø77mm(3.03") x112mm (4.41")
240ml : Ø77mm(3.03") x157mm (6.18")
|Certifications / IP codes||Ex ia IIC T4 / IP68|
|Remote installation||Up to 1m (3ft) with a pre-filled lubricant line of 8mm (5/16 ") O.D.|
|Thread size for installation||3/8 "Male BSPT (NPT Converter Available)|
PPL2 heavy duty grease
PL2 grease is based on thickened lithium complex grease and is designed for heavy-duty applications in harsh environments.
It is compounded and blended to withstand heavy loads and load shocks commonly found in primary metalworking industries, construction companies, and mining industries.
PL2 grease is mixed with high viscosity base fluids for exceptional strength film and is added with molybdenum disulfide for increased load capacity and anti-wear performance.
In addition it contains a unique blend of extreme pressure, anti-wear, and rust and oxidation inhibitors as well as functional polymers for better adhesion in wet environments and better performance at high temperatures. As it is complex lithium thickened grease, PL2 has a high drip point which also provides excellent protection in high temperature environments. Applications PL2 grease is a heavy duty grease that works effectively in simple and anti-friction bearings. It has excellent adhesion and cohesion characteristics and is highly resistant to mechanical cutting. Typical applications Ball bearings / rollers, bushings, slides, screws and general lubrication where heavy loads and low speeds are found. Among the industries that most commonly require heavy-duty grease are: steel mills, mining industries, cement / building processing, paper mills and paper processing in general.
- Excellent EP ("extreme pressure") and anti-wear properties against extreme shock loads.
- Minimizes bearing wear and extends equipment life.
- It has excellent friction reduction characteristics, allows easier start up, reduces heat and energy needed for the plants, leading to longer bearing life.
- Provides excellent protection against rust and corrosion, extending bearing life and performance.
- It has excellent mechanical stability, ensuring long-term protection.
- It is easily pumped in both single-point lubricators and centralized lubrication systems.