100cc Spring type Single point Automatic Lubricator Pulsarlube S with low temperature grease ( Spring type Unit ) (pack of 10 pieces)
Specifiche tecniche
100cc Spring type Single point Automatic Lubricator Pulsarlube S with low temperature grease ( Spring type Unit )The innovative Pulsarlube S has a unique design designed to definitively solve some problems typical of traditional spring grease nipples.
Thanks to its innovative design - in fact it contains a spring in the lower part - the Pulsarlube S lubricator drastically reduces the problem of oil separation.
The movement of the piston upwards prevents gravity oil from dripping and also maintains the consistency of the lubricant, which in turn reduces the possibility of hardening of the grease and allows the lubricant to completely empty its contents.
This product is a convenient choice for most light industrial applications.
Advantages
- It drastically reduces oil separation due to its unique design
- Much more reliable and effective than any other conventional spring lubricator
- Five selectable delivery levels to meet the lightest industrial applications Easy to use
- Simple to fill
- Easy to use
- Ready for installation
Technical specifications
| Technical specifications | Description |
|---|---|
| Capacity of the greaser | 100 ml |
| Grease size | 60ml : Ø67mm(2.64") x 129 mm (5.08") |
| Operating temperature range | -23°C ~ 121°C ( -10°F ~250°F) |
| Thread size for installation | 1/4" BSPT/NPT compatible Resilient Plastic |
| Remote installation | Not available |
| Multi-line lubrication | Not available |
Note that the Pulsarlube S is not a timed lubricator (it is not possible to check the dispensing time during use).
The device simply dispenses the amount of lubricant set through the spring loading and the Venturi effect, so that a precise amount of lubricant can be dispensed at the greasing point.
For this reason, the Pulsarlube S must not be installed on open or unshielded bearings.