100cc Spring type Single point Automatic Lubricator Pulsarlube S with high temperature grease( Spring type Unit ) (pack of 10 pieces)
100cc Spring type Single point Automatic Lubricator Pulsarlube S with high temperaturegrease( Spring type Unit )
The innovative Pulsarlube S has a unique design designed to definitively solve some problems typical of traditional spring grease nipples.
Thanks to its innovative design - in fact it contains a spring in the lower part - the Pulsarlube S lubricator drastically reduces the problem of oil separation.
The movement of the piston upwards prevents gravity oil from dripping and also maintains the consistency of the lubricant, which in turn reduces the possibility of hardening of the grease and allows the lubricant to completely empty its contents.
This product is a convenient choice for most light industrial applications.
- It drastically reduces oil separation due to its unique design
- Much more reliable and effective than any other conventional spring lubricator
- Five selectable delivery levels to meet the lightest industrial applications Easy to use
- Simple to fill
- Easy to use
- Ready for installation
|Capacity of the greaser||100 ml|
|Grease size|| |
60ml : Ø67mm(2.64") x 129 mm (5.08")
|Operating temperature range||-23°C ~ 121°C ( -10°F ~250°F)|
|Thread size for installation||1/4" BSPT/NPT compatible Resilient Plastic|
|Remote installation||Not available|
|Multi-line lubrication||Not available|
Note that the Pulsarlube S is not a timed lubricator (it is not possible to check the dispensing time during use).
The device simply dispenses the amount of lubricant set through the spring loading and the Venturi effect, so that a precise amount of lubricant can be dispensed at the greasing point.
For this reason, the Pulsarlube S must not be installed on open or unshielded bearings.
High temperature grease
Provides excellent low-temperature pumpability, very low starting and running torque and can reduce operating temperatures in the load zone of rolling element bearings.
Wide range of applications, Outstanding high and low temperature performance, Excellent resistance to rust, corrosion and oxidation.
Increased protection against water penetration.
The PL5 high temperature grease is suitable for a centralized lubrication system for high temperature applications such as:
- Drive rollers in continuous casting plant
- Conveyor rollers in continuous casting furnace
- Ladle turret link bearing
- Heating furnaces, drying stove
- Mold elevating platform pivot bearing
- Rolling bearing of roll stand
- Opening gate of bulk material equipment
- Cooling bed conveyor system
- Rotary kiln
- Long Service Life : Excellent shear stability, resistance to water/steam, and oxidation stability
- Excellent load carrying and anti-wear capacity : Extended equipment life
- Enhanced rust and corrosion protection
- Excellent pumpability
- Operating temperature: -40°C ~ 180°C