Pulsarlube EX - Electromechanical battery lubricator with ATEX certificate, for areas with risk of explosion - Capacity 125 cc

Pulsarlube EX - Electromechanical battery lubricator with ATEX certificate, for areas with risk of explosion - Capacity 125 cc
Disponibilità: disponibile
Prezzo: Prezzo standard: 334.00 € Offerta speciale: 167.00 €
Richiedi campioni e informazioni

Specifiche tecniche

Pulsarlube EX - Electromechanical battery lubricator with ATEX certificate, for areas with risk of explosion - Capacity 125 cc

It is designed primarily to meet the following requirements: UL79, electrically driven pumps for oil supply products, 8th Edition ANSI / ISA-12.12.01-2000, combustion-proof electrical material for Class I and II, Division 2 and Class III, Division 1 and 2 areas dangerous.

The circuits and particles of the Pulsarlube EX are effective based on the energy limit, adopting an explosion-proof and anti-spark structure that gives electric power to work in water under normal or exceptional conditions.

Features & Benefits

  • Applicable to electric motors as well as to other types of equipment classified as devices allocated to hazardous locations.
  • Tested by Underwriter Laboratories, meets the following requirements: UL79, electrically driven pumps for oil supply products.
  • Certification: Class I, Div. 2, Groups C and D. Where flammable gases or vapors are present in the air in sufficient quantities to produce explosive or flammable mixtures.
  • Convenient thanks to the use of replaceable grease cartridges and replaceable batteries.
  • Available grease cartridges: 125, 250 ml.
  • Delivery periods available: 1, 2, 3, 6, 12 and a half (H) months.

Technical data

Technical specifications Description
Grease cartridges 125ml, 250ml (replaceable)
Maximum operating pressure Max. 15kgf / cm² (200psi)
Operating temperature range - 15 ° C ~ 60 ° C (5 ° F ~ 140 ° F)
* with the Standard Alkaline Battery Pack
Power DC 4.5V Battery Pack (replaceable)
Settable delivery periods 1, 2, 3, 6, 12 and a half months
Delivery volume (cc / pump cycle) Approx. 0.34cc / cycle @ 20 ° C
Size of the grease gun 125 ml: Ø91 mm (3.6 ") x 183 mm (7.2")
250 ml: Ø91 mm (3.6 ") x 210 mm (8.2")
125 ml: 860 g (1.89 lb)
250 ml: 1.050 g (2.31 lb)
Certifications / IP code UL / ATEX / IP54
Multi-line lubrication (in more places) Not available (only lubrication is available on a single point)
Remote (remote) installation up to 3 meters (10 ft) with a 6mm (1/4 ") pre-filled line
Thread size for installation 3/8 "Male BSPT (NPT Converter Available)

Certifications

Certification UL ATEX KTL
Rating Class l Division 2 Groups C.D EEx nL IIB T5 IP54 Ex nL IIB T5 IP54
Gas Groups D-C1 l Div 1/2 IIA IIA
Maximum Surface Temperature T6 (85°C) T5 (100°C) T5 (100°C)
Enclosure Protection Indices - IP54 IP54
Classification of Hazardous Locations Cl l Div2
Cl l Zone2 (gas)
Zone2 (gas)
zone22 (dust)
-
Certificate Number E304815 LCIE 07
ATEX 6100X
12-KB2BO-0279X

The Pulsarlube EX is considered and certified by UL (USA), ATEX (Europe), and KTL (Korea). Refer to the table above when the evaluation is looking for an automatic lubricator for use in hazardous areas.

Danger of explosion - Do not consult or replace batteries unless the power supply is disconnected from the area without flammable gas or vapor concentrations.

This appliance is suitable for use in Class I, Division 2, Group C and D



Request samples and information

The information entered will not be disclosed to third parties or used for advertising purposes.