Unioeler EPO lubricant - UNI central lubricator - 500 ml capacity - Plexiglas material - EPO 500 model
Specifiche tecnicheUnioeler EPO lubricant - UNI central lubricator - 500 ml capacity - Plexiglas material - EPO 500 model
UNI EPO 500 centralized lubrication unit (for single-line operation).
The UNI unit of centralized lubrication EPO consists of an electric pump with regulation valve e 500 mm storage tank of contents.
The pump has been designed for single-line operations, keeping light for medium-chain machines intermittent lubrication with a max. 1.5 bar at a height of up to about 10 meters.
The distribution for each lubrication point is carried out by the UNI dripping system of ETR and MTR lubricants.
For chain lubrication, combinations with the SPR-SPF lubricating UNI brushes or the RSM roller brush have passed the various tests.
The pump is directly controlled by the existing machine control unit or switched from our programmable UNI timing and pulse generator TUP 1078/1 AL.
For the control of the level in the storage tank, the UNI centralized lubrication unit EPO 500 on request can be supplied with an integrated magnetic float switch.
Type EPO 500 nickel plated
Operating mode: Continuous intermittent function (In time 0.5 s up to 90 s).
Within this time frame, an intermittent and continuous task with 100% of the work cycle is insured as long as the switch-off period is the same at least at the time of ignition.
Operating mode: Short-term task (In time 0.5 s up to 150 s).
Within this time interval from 90 s up to max. 150 s, the off-time result must be at least twice at the on-time set, 50% of the work cycle.
Between 0.5 s and 90 s off-time must be less same as on-time set.
Accessories: UNI timing and pulse generator TUP 1078/1 AL;
Magnetic float switch UNI; lubricant drip system ETR / MTR;
UNI SPR / SPF oil brush; UNI RSM roller brushes / RSM-B;
UNI brush holder PHA / PHB / PHC; PVC / PA-pipe and pipe fittings.